Black Plexiglas panel for helm station Nautitech 46 Open
Compatible models :
74,24 € TTC
Replace or customise the helm station panel with this 5 mm black Plexiglas panel, designed for the Nautitech 46 Open. Made to order, the panel is supplied blank, allowing the customer to create the cut-out for their chartplotter according to the exact screen dimensions and drill the required mounting holes themselves.
(The image showing the dimensions may appear dull or damaged because the protective film is still on the plexiglass.)
3 in stock
This 5 mm black Plexiglas panel is designed to replace the panel located at helm station of the Nautitech 46 Open, including the panel used to integrate a multifunction display or marine chartplotter.
Made to order, the panel is manufactured from 5 mm black Plexiglas and supplied blank, without cut-outs or drilled holes. This allows the owner or installer to precisely adapt the panel to their specific marine electronics.
The chartplotter cut-out must be made by the customer according to the exact dimensions of their display. The mounting holes must also be drilled by the customer according to the chartplotter model and its mounting system.
This panel provides a practical solution for replacing the original helm station panel or refreshing the appearance of the helm while allowing full customisation to suit the navigation electronics installed on board.
Technical specifications of the Plexiglas panel for Nautitech 46 Open
- Material : Plexiglas
- Thickness : 5 mm
- Colour : Black
- Display cut-out : Not included, panel supplied blank
- Mounting holes : Not drilled
- Customisation : Cut-out and drilling to be carried out by the customer according to the display dimensions and model
Important : The panel is supplied blank. The chartplotter cut-out and mounting holes must be made by the customer according to the equipment being installed. Carefully check the display and mounting dimensions before cutting or drilling.
| Weight | 0,9 kg |
|---|---|
| Dimensions | 42 × 26,5 × 0,5 cm |
