Marco UP6/E Gear Pump 12V/24V 26 l/min
693,60 €
The Marco 12/24 Volt gear pump offers optimum flow and pressure management thanks to its electronic regulator. This equipment for your boat has a capacity of 26 L/min and a maximum pressure of 2.5 bars. It has a diameter of 16 mm and is self-priming up to 1.5 metres.
This equipment for catamarans or sailboats comes with a filter and fluted fittings.
On backorder
Compatible models :
The UP6 Marco 12V/24 V gear pump for your catamaran is equipped with an electronic regulator for optimum management of water flow and pressure on board. This pump has a maximum capacity of 26 l/min and a maximum pressure of 2.5 bars. It has a 16 mm diameter and a self-priming capacity of up to 1.5 metres for your boat.
The electronic regulator allows dynamic adjustment of the flow rate to maintain pressure, even when the flow rate varies. This ensures constant pressure and maximum efficiency over a wide range of flow rates.
The pump has built-in protection against overload, short-circuit and lack of water, for added safety. This means it can adapt to a wide range of demanding operating conditions.
Supplied with a filter and splined fittings, the UP6 gear pump is quick and easy to install on your onboard water system.
This water unit is found on sailboats, launches and catamarans (including the Nautitech 40 and 44 Open).
Technical specifications of the Marco UP6/E gear pump 12V/24V 26 l/min :
- Pump type: electric pump
- Voltage: 12-24 V
- Fuse: 20 A
- Max capacity: 26 l/min
- Max pressure: 2.5 bars
- Diameter: 16 mm
- Self-priming: 1.5 m
- Filters and barbed fittings included
- Manufacturer reference : 164 622 15
| Weight | 4,4 kg |
|---|
